Ada Door Hardware Specifications

Knobs that require a full hand grip and turning including round door knobs and shower controls do not comply because they require twisting of the wrist.

Ada door hardware specifications. Traditional round doorknobs are not accessible as they require tight grasping and twisting to turn. 4 13 2 revolving doors and turnstiles. Door hardware must not require more than 5 lbs. Height of operating mechanisms hardware for window or door operation should not be higher than 48 inches above the finished floor surface see fig.

Revolving doors or turnstiles shall not be the only means of passage at an accessible entrance or along an. Some allowances can be made for window hardware height depending on parallel approach clear floor space see fig. A minimum of 10 inches is required from the bottom of pull handle to the finished floor on the corridor side. Door hardware ada compliant locks exit devices handles pulls latches and other operable parts on doors shall comply operable parts of such hardware shall be 34 inches minimum and 48 inches maximum above the finish floor or ground.

Size 4 8 pounds of closing force minimum. Stationary knobs with a shape that can be loosely gripped also are acceptable. To be ada compliant an interior door can not have an opening force of more than 5 pounds. If the door opens out the handle allows for a stable door pull.

Entrances doors and gates. You simply push or pull our handle and the door is unlatched. Lever handles and some other types comply with this requirement. A better ada compliant door handle.

It must also be operable with one hand and without tight grasping pinching or twisting of the wrist. Standard u shaped pulls and lever shaped handles are acceptable. Doors required to be accessible by 4 1 shall comply with the requirements of 4 13. Minimum number 206 4 doors doorways and gates 206 5 and 404 automatic and power assisted doors and gates 404 3 common questions.

2 which can increase the maximum side reach height to 54 inches see fig. Size 5 11 pounds of closing force minimum. ü the pull handle must be operable with one hand limb without tight grasping pinching or twisting of the wrist. ü sliding or swing door hardware must not require more than 5 pounds of force to operate.

Section 4 13 1 4 13 12 of the ada legislation deals with door hardware and outlines the requirements that all government commercial and public facilities must meet. Size 6 14 pounds of closing force minimum. ü locking ladder pulls must have a lever actuator not a typical thumb turn requiring a push as well as turn rotation. Of force to operate.